NUMEDIC NEW GENERATION POND MIXER
NZ PATENT NUMBER #599021, WORLDWIDE PCT/2013/00051
The Numedic Pond Mixer will break up the thickest crust and mix the contents of any shaped storage pond or tank quickly and efficiently. Pond Mixers are now being used in effluent ponds, above ground storage tanks and industrial applications like concrete plants. No longer will you be left with a metre or two of sludge or build-up at the bottom of your pond or crust on the surface that you cannot pump. Superior mixing will let you utilise the entire pond, enabling you to reclaim back all of your storage pond capacity.
15 Minutes after Installation:
The Numedic Pond Mixer has been designed to meet the challenges of high input farms and large storage ponds. The Numedic Pond Mixer has been operating on a 60 metre x 20 metre effluent storage pond since September 2012 where it has been operating extremely well. “It’s absolutely brilliant” and, “has been performing flawlessly” are just a few of the words that have been used to describe its performance.
At Installation: After 6 hours:
Two 590mm opposing blades are installed at a 45 degree downward angle to ensure the entire pond or tank is mixed. These blades rotate at an RPM that is most effective for your situation. The position of these blades is controlled by a Variable Speed Drive which allows you to set 8 different positions and speeds for the blades to position themselves ensuring every inch of the storage pond or tank is mixed.
Click here for a brochure
Concrete Plant in South Auckland, NZ